Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
3d_printer_files [2024/02/12 03:29] – [3D Printer Files by Minhnhat Le for 7 button Chorders] priestdo3d_printer_files [2025/03/17 20:21] (current) – [3D Printer Files by Minhnhat Le for 7 button Chorders] priestdo
Line 13: Line 13:
  
  
-Using my [[https://web.archive.org/web/20170620144326/http://chorder.cs.vassar.edu/spiffchorder/2010-03-leather|desktop leather chorder]] as a starting point, Nhat and I talked about a 3D printable design. Nhat produced several variations of that design.+Using my [[spiffchorder:2010-03-leather|desktop leather chorder]] as a starting point, Nhat and I talked about a 3D printable design. Nhat produced several variations of that design.
  
 All the designs share a common bottom housing called “Chorder housing - bottom - common” All the designs share a common bottom housing called “Chorder housing - bottom - common”
Line 23: Line 23:
 While I am only posting all the drawings, the one I have tried and recommend are “Chorder housing - top - top down - with suppressor”, that being Cherry Key Switches snap into the housing from the top (outside) with a recess to hold a layer of mouse pad (or similar materiel) which acts to suppress key click noise. While I am only posting all the drawings, the one I have tried and recommend are “Chorder housing - top - top down - with suppressor”, that being Cherry Key Switches snap into the housing from the top (outside) with a recess to hold a layer of mouse pad (or similar materiel) which acts to suppress key click noise.
  
-^ ^Download the Latest 3D case files | 
-|  {{::cc-by-nc.png|}}| {{ ::desktop_chorder_enclosure_3d_printing_files_v1.zip |}}| 
-^ ^Available under Creative Commons – Attribution No Derivatives – CC BY-ND | 
-| md5 | 4d1e7387904cb6fbbc15100c72779c11 | 
  
 +Flat case bottoms that work with Nhat's top pieces and are a modification of Nhat's designs were produced by Zach Lash. Those are in the file labled "flat_bottoms"
 +
 +
 +<box 60% red round | **Download the 3D case files** >
 +{{ ::desktop_chorder_enclosure_3d_printing_files_v1.zip |}}
 +</box|md5 4d1e7387904cb6fbbc15100c72779c11> 
 +
 +<box 60% red round | **Download the 3D case flat bottom files** >
 +{{ ::chorder_housing_-_flat_bottoms.zip |}}
 +</box|sha256 c1737974b783df5919ce1a07400682be2e24ffd6533f71ce42b4e3ed103131f1>