Differences

This shows you the differences between two versions of the page.

--- 3d_printer_files [2024/02/12 06:46] – [3D Printer Files by Minhnhat Le for 7 button Chorders] priestdo
+++ 3d_printer_files [2025/03/17 20:21] (current) – [3D Printer Files by Minhnhat Le for 7 button Chorders] priestdo
@@ Line 13: / Line 13: @@
-Using my [[https://web.archive.org/web/20170620144326/http://chorder.cs.vassar.edu/spiffchorder/2010-03-leather|desktop leather chorder]] as a starting point, Nhat and I talked about a 3D printable design. Nhat produced several variations of that design.
+Using my [[spiffchorder:2010-03-leather|desktop leather chorder]] as a starting point, Nhat and I talked about a 3D printable design. Nhat produced several variations of that design.
 All the designs share a common bottom housing called “Chorder housing - bottom - common”
@@ Line 22: / Line 22: @@
 While I am only posting all the drawings, the one I have tried and recommend are “Chorder housing - top - top down - with suppressor”, that being Cherry Key Switches snap into the housing from the top (outside) with a recess to hold a layer of mouse pad (or similar materiel) which acts to suppress key click noise.
+Flat case bottoms that work with Nhat's top pieces and are a modification of Nhat's designs were produced by Zach Lash. Those are in the file labled "flat_bottoms"
@@ Line 27: / Line 30: @@
 {{ ::desktop_chorder_enclosure_3d_printing_files_v1.zip |}}
 </box|md5 4d1e7387904cb6fbbc15100c72779c11>
+<box 60% red round | **Download the 3D case flat bottom files** >
+{{ ::chorder_housing_-_flat_bottoms.zip |}}
+</box|sha256 c1737974b783df5919ce1a07400682be2e24ffd6533f71ce42b4e3ed103131f1>