3D Printer Files for Chorders

2024-02-11 This page was lost and is in the process of being brought in from the internet archive backup. Once fully converted this note will be removed

Files for 3D printing a housing for a 7 key chorder. If you have something you would like to contribute, let me know!

Using my desktop leather chorder as a starting point, Nhat and I talked about a 3D printable design. Nhat produced several variations of that design.

All the designs share a common bottom housing called “Chorder housing - bottom - common”

• The bottom does not have a hole or slot for cables. You can add that or drill it after.
• I also suggest gluing a layer of some kind of non-slip surface to the bottom.
• If you are using it in a fixed location, you might want to add some weights (fishing weights or something like that) to give the keyboard a bit more heft.

While I am only posting all the drawings, the one I have tried and recommend are “Chorder housing - top - top down - with suppressor”, that being Cherry Key Switches snap into the housing from the top (outside) with a recess to hold a layer of mouse pad (or similar materiel) which acts to suppress key click noise.

As always, this is a work in progress. Please let me know if you build/use these files. If you send pictures tell me if I can post them and if so, how you would like them attributed.

Greg

— mailto:contact_greg%20%5Bat%5D%20budgardr%20%5Bdot%5D%20org|Greg Priest-Dorman]] Minhnhat Le 2015/03/30