This is an old revision of the document!
March 2010 Leather Desktop Chorder
Sunday afternoon project. This one uses the atmega168 chip. It is built on a Radio Shack 276-150 printed circuit board which greatly reduces the need to run wires around. It uses cherry keyswithches with replacement lighter weight springs.
-Greg
 |
|
 | Underside of the plastic board with keyswithches |
 | circuit |
 | underside of circuit |
 | foam |
 | circuit in place |
 | more foam |
 | exterior showing layers of leather |
 | exterior showing layers of learther |
 | trimmed and glue applied |
 | thin exterior layer glue applied |
 | assembled |
 | cleaned up |