Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== chorder works with atmega8 but not atmega168:Solved ====== A few folks had chorders that worked fine with the atmega8 but would not work with the atmega168. At Mikkel's suggestion we tried changing the diodes. We found that while the atmega8 will work with diodes rated at 1 watt, atmega168 will not work properly in those same circuits. Using diodes rated at 500 mW works for both the atmega8 and the atmega168. The digikey part number on the component page is for 500mW diodes. --- //[[priestdo@cs.vassar.edu|Greg Priest-Dorman]] 2010/03/21 17:18//